Well, this is my first layout when I try to learn Eagle CAD software. It is quite a mess. So, bear with me.

The layout itself isn’t really good. Many jumper wires that needed to solder. I made this layout just for fun, sometimes we need a funky led to making our life looks interesting.

This circuit generates flashing light in running pattern. I modify this circuit a little bit from the original one. The original one just has three led to flash and run.  The timer IC is NE555, please don’t use LM7555.
If you wanna build this, here is the schematic, layout and component side which could help to attach components.

Layout



Components side

Have fun building and thank you for coming to my blog. I have USBasp programmer layout design. Check it out folks !

Pin It

3 comments:

  1. Incredible posting this is from you. I am really and truly thrilled to read this marvelous post. You've really impressed me today. I hope you'll continue to do so!
    Lab Test Equipment

    ReplyDelete
  2. You made such an interesting piece to read, giving every subject enlightenment for us to gain knowledge. Thanks for sharing the such information with us to read this... https://www.montypythonlive.com/best-led-grow-lights/

    ReplyDelete
  3. Really I enjoy your site with effective and useful information. It is included very nice post with a lot of our resources.thanks for share. i enjoy this post. floor lamps/lights

    ReplyDelete

Back to Top